How to remove the drywall paper without damaging the wall? Here is your complete guide

Repair work the process of repairing can be a tricky task to perform. After the completion of the construction work, it is not easy to spare money from the budget after the construction takeoff services. Some of the repair works require more money. These can also prove to be tricky in terms of technicalities and complexities. Also, can be expensive in terms of hiring of professionals.

That is to say, if you are hiring a professional for the work of removing the drywall paper or some damaged bricks from the wall, it is going to add to the expenses. This can really create a chaos in terms of shortage of money that is required for the work. Construction cost estimators encourage the creation of a buffer for these kind of works. Buffer allows the margin to put aside some amount in order to perform tasks that occur after the completion of the project. It is the smart approach with multifold benefits. You will not have to bear the burden if you do not have the money at the time of repair work since you will already have that pool.

In addition to that, you will know exactly who to hire for the job and what are the rates of hiring. Since you have already availed their services. This allows you to create a margin while fulfilling your needs of repair work.

However, if you do not want to hire a professional and the job seems simple enough, you can make it a DIY project. It is not difficult to perform such kind of tasks, as it only requires right type of gear and expertise to make sure you get it right. That is to say, we have the information that you are going to need for the job. This is the focus of this piece of writing. We will list the items that you will need and the systematic guide of how to remove the drywall paper on your own.

Tools required for the task:

  • Screwdriver
  • Bucket
  • Spray bottle filled with water
  • Rags
  • Utility knife (just in case) or tap knives
  • Plastic sheets
  • A new roll of wallpaper( if you want to install another one)

Systematic guide for removing or changing the drywall paper:

The steps that we are going to list are more generic in nature. The general information that you are going to need for the task.

Secure your floor:

This is the basic step. Secure the floor with the rags or the plastic sheet so that you will not end up ruining it. The scarps can cause a damage to the floor when walking. Since you are going to work and move a lot, you will want to protect your floor from scratches and cuts. Otherwise, you will soon be contacting the construction estimator for budget estimation for the floor.

Start scraping the wallpaper:

This is your next step. Take the tap knife and start scraping. There will be bits of the damaged or faded wallpaper that you can just scrape with your hands. If this is the case, scrape them off with your hand. This will give you less work to do with the scrape knife. If you are facing difficulty in scraping, try to make corners your target. Use the edge of the knife to scrape off the corner.

Spray the water if you cannot scrape the dry paper anymore:

Spraying water over those stubborn bits of paper sounds like a practical idea. The water makes the paper soft and easy to remove. Spray enough water to make it wet and then use the tap knife or the scrapper to take out those bits.

This will help you in achieving a smoother look for the wall. The texture will be under protection all the time. In addition to that, possible damage to wall by scrapping hard will be avoided.

Use sand paper for further cleansing:

If the wall still has the tiny or thin pieces of paper sticking to the wall, sandpaper is your ultimate option. Use the sand paper to remove them. Additionally, you can also use the sand paper to remove any kind of glue or sticking agent that you previously applied to the wall to make the paper stick. Through this, your wall will be ready for the further application and the remaining pieces of paper or glue will not create bumps.

Wash the scrapped wall:

This step is necessary for preparing the wall for further application of wallpaper. After you have removed the paper completely through sandpaper, wash it to remove any kind of dirt of debris. You can simple choose to clean it with a wet rag or cloth but it will not be as efficient as washing. The remaining debris or the dust can cause trouble when putting on adhesives for the new wallpaper.

Apply the new wallpaper:

After you have cleaned the wall, let it dry. Put the new wallpaper on the wall using the prescribed adhesive. Now you have the margin and space to be very creative. Use it wisely.

Through these simple and effective steps, you can change your own wallpaper. If you are worried about exceeding the budget limit, or have not set one, you can always tend to the professional construction takeoff services to know the material takeoffs. That will be a big help in addition to the savings, which you will have after you are done.